Ru / En
TL Series
Aluminum Four Section Hinged Multipurpose Ladder (Transformer)
Shape: aluminum
Rungs: aluminum

The ladder consists of four sections, interconnected by steel ladder hinges with fixing angles of 35, 105 and 180 degrees. Therefore, such ladder can take various shapes, such as shown in the Figure.

The main advantage of the ladder is not its multiple setup options and platform configuration, but compactness in the assembled (transport) state, which allows it to be transported inside the car with a closed trunk.

Most often, the transformer is used as a straight ladder or as a twin step ladder. The platform configuration is used extremely rarely, although the possibility of such use often plays a decisive role in choosing a ladder when purchasing it.

To use a T model ladder in the platform configuration, it is necessary to additionally purchase a standard scaffold, working without which is not recommended. To use a TL model ladder in the platform configuration is prohibited.

The ladder is noticeably (almost 6 kg) heavier than the straight ladder of the same length of H1 or P1 series due to six massive steel hinges and, for the same reason, is significantly more expensive.

Specifications

TL Series

SKU
TL4022
  • TL4022
42 0.66 0.26 1.18 2.40 2.28 3.50 0.33 0.6 9.3
TL4023
  • TL4023
2x2+2x3 0.94 0.26 1.44 2.96 2.54 4.06 0.33 0.7 10.1
TL4033
  • TL4033
4x3 0.94 0.26 1.71 3.52 2.81 4.62 0.33 0.7 10.9
TL4034
  • TL4034
2x3+2x4 1.22 0.26 1.98 4.08 3.08 5.18 0.33 0.7 11.6
TL4044
  • TL4044
4x4 1.22 0.26 2.24 4.64 3.34 5.74 0.33 0.7 12.5
TL4045
  • TL4045
2x4+2x5 1.52 0.26 2.51 5.20 3.61 6.30 0.33 0.8 14.5
TL4055
  • TL4055
4x5 1.52 0.26 2.78 5.76 3.88 6.86 0.33 0.8 15.1

TL SP Series

SKU
TL4033SP
  • TL4033SP
4x3 0.94 0.26 1.71 3.52 2.81 4.62 0.33 0.7 14.3
Back to section